PP 90 Manual

PP 90 Manual

Oscilloscope Probe KitThe PP-90 probe is a passive. low-impedance attenuation probe. The probe has been designed and calibrated for use on instruments having an input impedance of 1MΩ paralleled by 20pF. However, it may be recalibrated for use on instruments having an input capacitance of15 to 40pF. The probe incorporates a two position (1X, 10X) slide switch in the compensating network and cable length of 1.2 meters. The specification is as follows.Table 1 ELECTRICAL CHARACTERISTICSTemperature -15 ℃ to 70℃Table 2 PHYSICAL CHARACTERISTICSCharacteristic Performance Requirements 95mmPP-90 Characteristic Attenuation Input Capacity Oscilloscope Input capacity Performance Requirements X1X1:85pF~115pFProbe BodyX10X10:18.5pF~22.5pFCoaxial Cable Weight1200mm 55g(max)15pF~40pF Standard Accessories X10:10MΩ± 2% 1. Probe Tip ........................ 1pcs 2. Ground Lead ................... 1pcs 3. Marker Ring .................... .2pcs 4.TipLocatingSleeve ................. 1pcs 5. Adjustment Tool ................. 1pcsInput Resistance X1:1MΩ± 2% X1:DC-6MHz Band width Max input Voltage X10:DC-80MHzConformed IEC-61010 CAT II X1: 200V DC+Peak AC X10: 600V DC+Peak ACNote: Content of this document are subject to change without notice.Oscilloscope Probe KitPP-90