DPA C EN 20180423 EN leaflet

Multifunction Pressure Sensor DPA Series► Energy-saving mode ► Various unit conversion ► Analog output function ► Various output modes ► 10 sets of output response time setup ► 3 sets of color display ► Fast zero reset ► Safety control function ► Easy code display ► Parameter copy functionVarious Unit ConversionThe DPA Series offers 6 kinds of globally adopted pressure units for measurement and display.Fast Parameter CopyThe DPA Series fast copies the internal parameters to other slaves and saves repeated parameter setup time.inchHgpsiCopykPammHgMaster kg/cm² barSlave3-Color LCD Display (Green, Red, Orange)The large LCD with a green, red and orange 3-color LCD display allows users to set the display color according to the ambient environment, such as when the pressure is within normal range or exceeds the allowed range. The display’s color is orange when in parameter setup mode. This makes it easy for reading and reduces operation errors.Safety Control ModeThe safety control mode prevents operators from carelessly touching relevant parameters and affecting the operation and production of the equipment.In safety control modeColor for upper / lower limit display (green / red)Parameter set up (orange)1LockedSpecificationsPower SupplyVoltage range Power consumption Pressure type Measurable range 12 ~ 24 VDC ± 10% no isolation 40 mA Max.; current output type 60 mA Max. Non-corrosive gas, gauge type DPA01: -100 kPa ~ 100 kPa DPA10: -100 kPa ~ 1,000 kPa DPA01: 200 kPa DPA10: 1,500 kPa ± 3% entire process ± 2% entire process 2-line LCD display, 4 digits for measured value and 3.5 digits for setup display LCD output status display 3 colors for different modes 250 ms, 500 ms, 1,000 ms Built-in 2 NPN or PNP transistor digital outputs and 1 analog output NPN: Max. durable pressure 30V / 100 mA, residual voltage 1.5 V PNP: Max. durable pressure 30V / 100 mA, residual voltage 1.5 V 1 ~ 5 V: Min. output load resistance 1,000 Ω 4 ~ 20 mA: Max. output load resistance 400 Ω; linear inaccuracy 2% entire process 2 ms, 4 ms, 10 ms, 30 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms Linear inaccuracy: ± 2% entire process Outer diameter PT1/8, inner diameter M5 Outer diameter NPT1/8, inner diameter M5 Outer diameter Rc1/8, inner diameter M5 10 ~ 550 Hz, 100 mm, 3 axes for 2 hours Max. 100 m/s2, 3 axes 6 directions, 3 times each 0°C ~ +50°C -20°C ~ +65°C 2,000 m 35% ~ 80% RH (non-condensing)Pressure MeasurementMax. durable pressure Measurement accuracy Temperature inaccuracy Setup display Status display Display mode Cycle Number of outputs Transistor outputDisplayOutputAnalog output Response time Output inaccuracy