en For your safety Children shall not play with the appliance. Cleaning and user maintenance must not be performed by children unless they are supervised. Do not leave the running appliance unattended. Connect and operate the appliance only in accordance with the specifications on the rating plate. Only use the appliance indoors at room temperature and up to 2000 m above sea level. Always disconnect the appliance from the supply if it is left unat- tended and before assembling, disassembling or cleaning. Do not place the power cord over sharp edges or hot surfaces. Do not use the appliance if the power cord and/or appliance are damaged.
To prevent injury, a damaged power cord must be replaced by the manufacturer or his customer service or a simi- larly qualified person. Only our customer service may repair the appliance. Safety instructions for this appliance W W Risk of injury! W W Risk of electric shock! Do not insert the mains plug until all preparations for working with the appliance are complete. When the appliance is not in use, pull out the mains plug. Before eliminating a fault, pull out the mains plug. Never immerse the base unit in liquid or hold under running water. Do not use a steam cleaner. Use only the rotary switch to switch the appliance on or off. W W Risk of injury from the rotating tools!
Before replacing accessories or additional parts, which move during operation, switch off the appliance and disconnect from the power supply. When the appliance is switched off, the drive continues running briefly and stops in the tool change position. Do not adjust the swivel arm while the appliance is switched on. Wait until the drive has come to a standstill. Keep hands clear of rotating parts. While the appliance is operating, never place fingers in the mixing bowl. Do not reach into the feed tube. Do not operate the appliance without the lid. For reasons of safety the appliance cannot be operated unless unused drives are covered with drive guards. W W Risk of injury from sharp blades!
Do not grip the sharp blades or edges of the cutting discs. Take hold of cutting discs by the edge only. Do not touch blender blades with bare hands. 18 124_MUM58xxx_8001027214.indb 18 27.11.2015 15:11:45