HOME 2.9 PASSENGER FOOTRESTS PASSENGER FOOTRESTS (ALL EXCEPT VRSCF) PASSENGER FOOTRESTS (VRSCF) Removal Removal 1. See Figure 2-22 . Remove retaining clip (6) and spring washer (5) from clevis pin (4). holding footrest (1), remove clevis pin, and footrest from footrest bracket (2). 1. See Figure 2-21 . Remove retaining clip (6) and spring washer (5) from clevis pin (4). holding footrest (1). Remove clevis pin, and footrest from footrest bracket (2). 2. Remove two nuts (7) from footrest bracket (2). Remove footrest bracket. 2. Remove two socket head capscrews (3) from footrest bracket (2). Remove footrest bracket. 3. Repeat for opposite side passenger footrest assembly. 3.
Repeat for opposite side passenger footrest assembly. Install and tighten socket head capscrews (3) to 19-27 Nm (14-20 ft-lbs). Figure 2-22. Passenger Footrests (VRSCF) 2. Install footrest (1) to footrest bracket and hold in upward position. Installation 3. Install clevis pin (4) through footrest bracket (2), install spring washer (5) and secure with a new retaining ring (6). 1. See Figure 2-22 . Mount the footrest bracket (2) to exhaust support using the stud plate (3). Install and tighten nuts (7) to 19-27 Nm (14-20 ft-lbs). 2. Install footrest (1) to footrest bracket and hold in upward position. 4. Repeat for opposite side. 3.
Install clevis pin (4) through footrest bracket (2), install spring washer (5) and secure with a new retaining ring (6). 4. Repeat for opposite side. 2009 VRSC Service: Chassis 2-25 sm02039 2 3 5 6 4 1 1. Footrest 2. Footrest bracket 3. Socket head capscrews (2) 4. Clevis pin 5. Spring washer 6. Retaining clip Figure 2-21. Passenger Footrests Installation sm06175 5 4 6 2 1 7 3 1. Footrest 2. Footrest bracket 3. Stud plate (2) 4. Clevis pin 5. Spring washer 6. Retaining clip 7. Nut (4)