HOME Figure 3-129. Mark Case and Cylinder Liner and Install Cylinder Liner Remover/Installer 27. See Figure 3-130 . According to instruction sheet for cyl- inder liner remover/installer, remove liner. 28. See Figure 3-131 . Inspect piston jet. Piston jet must fit tight and have no visible damage. If loose or damaged, crankcase must be replaced. 3-56 2009 VRSC Service: Engine sm01125 Figure 3-127.Tighten Primary Gear sm01105 Figure 3-128. Measure Cylinder Bore 25. See Figure 3-128. Using a dial bore gauge, check cylinder concentricity. See specifications for serviceability. NOTE If cylinder liner is to be removed, mark liner and crankcase so the liner can be installed in the same position.
Pick a convenient feature for reference. 26. See Figure 3-129. Mark case and cylinder liner and install CYLINDER LINER REMOVER/INSTALLER (Part No. HD- 45313). sm01128