HOME 1.5 AIR CLEANER AND EXHAUST SYSTEM REMOVAL 1. Open seat. sm01692 NOTE On VRSCF models, it is necessary to remove the front side covers before proceeding. 2. See Figure 1-1 . Remove air box cover by turning bailhead fastener 1/4 turn counterclockwise (CCW). Pull air box cover away from locating holes. sm01690 Figure 1-1. Air Box Cover Bailhead Fastener (typical) 3. See Figure 1-2. Remove IAT connector (1) by pushing down on bail wire to unlock. Air box top is retained by eight clips (2), three per side, one at the rear and one in the front under the snorkel. Disconnect clips and remove air box top. sm01691 1 2 1. IAT connector [89] 2. Retaining clips Figure 4. See Figure 1-3.
Rem air filter. Cover the throttle body bores w 1-2. Air Filter Top objects from falling down the inj shop cloths or objects that co plates. (00212d) ove wing nut securing filter cap and 2009 VRSC Ser