HOME 4.18 INTAKE LEAK TEST Figure 4-44. Leak Tester PROCEDURE 1. Start engine. 2. Warm up engine to operating temperature. Do not allow open flame or sparks near propane. Propane is extremely flammable, which could cause death or ser- ious injury. (00521b) NOTE Do not direct propane stream toward front of engine. If propane enters air horn, a false reading will be obtained. 2009 VRSC Service: Fuel System 4-37 Do not allow open flame or sparks near propane. Propane is extremely flammable, which could cause death or ser- ious injury. (00521b) Read and follow warnings and directions on propane bottle. Failure to follow warnings and directions can result in death or serious injury.
(00471b) NOTES • To prevent false readings, keep air cleaner cover installed when performing test. • Do not direct propane into air cleaner; false readings will result. LEAK TESTER PART NUMBER TOOL NAME HD-41417 PROPANE ENRICHMENT KIT Parts List • Standard 14 oz. propane cylinder. • PROPANE ENRICHMENT KIT (Part No. HD-41417). Tester Assembly 1. See Figure 4-44. Make sure valve knob (6) is closed (fully clockwise). 2. Screw valve assembly (5) onto propane bottle (1). Tester Adjustment 1. See Figure 4-44. Press and hold trigger button (8). 2. Slowly open valve knob (6) until pellet in flow gauge (7) rises to between 5 and 10 SCFH on gauge. 3. Release trigger button.
sm02629 8 9 7 6 5 4 1 2 3 1. Propane bottle 2. Nozzle 3. Copper tube 4. Hose 5. Valve assembly 6. Valve knob 7. Flow gauge 8. Trigger button 9. Hanger