HOME EXHAUST SYSTEM LEAK CHECK Check the exhaust system for leaks at every scheduled service interval as follows: 1. Check entire exhaust system for loose or missing fasteners, damaged pipe clamps or brackets, and obvious signs of leakage (carbon tracks at pipe joints, etc.). 2. Check for loose or damaged heat shields. Repair or replace as necessary. 3. Start engine, cover muffler ends with clean, dry shop towels and listen for audible signs of exhaust leakage. 4. Correct any leaks detected. See 4.14 EXHAUST SYSTEM: VRSCAW or 4.15 EXHAUST SYSTEM: VRSCDX or 4.16 EXHAUST SYSTEM: VRSCF for exhaust system removal and installation procedures. 2009 VRSC Service:
Maintenance 1-13 sm01697 sm01698 1 Box Clip snorkel is attached to top er the lip on the air filter ector. 2 ox cover with the locating ame tabs. tener 1/4 turn clockwise. covers. 1. Locating pins 2. Frame tab holes Figure 1-9. Air Box Cover and Frame Tabs (typical)