HOME 1.20 SUSPENSION ADJUSTMENTS REAR SHOCK ABSORBERS with a spanner wrench. When returning to off-cam position, cams should be backed off in opposite direction. A SPANNER WRENCH (Part No. 94700-52C) is available from your Harley- Davidson dealer. TOOL NAME PART NUMBER SPANNER WRENCH 94700-52C General sm01723 See Figure 1-51 . The rear shock absorber spring preload can be adjusted for the weight the motorcycle is to carry and has five preload graduations. Notice the adjustment settings as you turn the collar. Adjustment Be sure both shock absorbers are adjusted to same pre- load position.
Improper adjustment can adversely affect stability and handling, which could result in death or ser- ious injury. (00036a) The average weight solo rider might use the extended spring preload position (adjustment setting 1 or 2). 1. Place the shock absorber adjustment tool around the lower collar of the shock absorber. Figure 1-51. Rear Shock Adjustment (typical) 2. Turn the collar clockwise (toward higher numbers) to Figure 1-52. Spanner Wrench (HD-94700-52C) See Figure 1-51 . To adjust the rear shock absorber spring preload, turn the spring adjusting cam to the desired position 2009 VRSC Service: Maintenance 1-45 increase the preload or pressure.
Use the adjustment setting numbers as a reference fo adjustment of shock absorbers on both the right and l of the motorcycle. A heavy solo rider might require ad preload or pressure (adjustment setting 3). r equal eft side ditional om01113