How to Use Setting Language Working Modes Press and hold the button for 3 seconds to open the language list, then press the button to scroll through the language to select the desired one. Press and hold the button for 2 seconds to use the selected language. The vacuum cleaner has two working modes, you can select the desired one based on your cleaning needs. 1. Non-continuous Mode Hold down the power button to start the vacuum cleaner, then release to stop it. Note: The display screen will go off if there is no operation for more than 10 seconds. Switching Suction Levels Press the button to switch suction levels of eco, standard/ auto, and high power.
The corresponding suction level will be highlighted on the display screen. Only when using the smart high torque brush bar, the auto mode will be activated and the notification of "Auto" will appear on the display screen. The vacuum cleaner will then automatically switch the suction level between the floor/tile and the carpet. Non-continuous Mode Note: Stop the vacuum cleaner at any time while cleaning, it will continue to use the last selected suction level when started again. 10