Care & Maintenance Note: Before cleaning or doing maintenance on the vacuum cleaner, turn it off and unplug it. Clean the dust compartment regularly to avoid the buildup of dust that could cause blockage and affect the suction. To prevent dust from falling on the floor, hold the dust compartment over a trash can to remove it. Removing & Installing the Dust Compartment 1. Afer vacuuming or when the dust compartment is full, pull out the extension rod and rotate the dust compartment in the direction shown in the figure. When " " is lined up with the unlock symbol " ", the dust compartment can be removed from the vacuum cleaner. Filter 2.
Take the filter out of the dust compartment as shown in the figure, then remove the dust from its surface. Dust Compartment 3. Flip the cyclone separator handle over the trash can to remove the cyclone separator from the dust compartment, as shown in the figure. Empty the content in the dust compartment and clear any dust from the surface of the cyclone separator. 11