4. Place the cyclone separator and filter back into the dust compartment when the cleaning is completed. Align the unlock symbol " " with " " then rotate the dust compartment in the direction shown in the figure until " " is lined up with the lock symbol " ". Once you hear a click, the duct compartment is securely installed onto the vacuum cleaner. Installing the Cyclone Separator Press the cyclone separator straight downwards until it reaches the end of the dust compartment. Cleaning the Dust Compartment & Filter Assembly Take the filter, filter coton, and cyclone separator successively out of the dust compartment. Remove any dust on their surface, then rinse them with clean water.
Make sure they are thoroughly dry in a well-ventilated place away from direct sunlight before use. If necessary, you can replace the filter with the specified model of the filter. Filter Filter Coton Cyclone Separator Dust Compartment 12