Cleaning the Roller Brush 1. Press the roller brush buton as shown in the figure to pop open the roller brush cover, then pull out the roller brush to clean it. Afer it has been cleaned, put the roller brush back and close the cover until you hear a click. 2. Cut off the hair and fibers atached to the roller brush and remove them. Roller Brush Buton Roller Brush Cover When cleaning the vacuum cleaner, use a dry cloth. Do not use chemical solvents such as gasoline, alcohol, or lacquer thinner, as these will cause the shell to crack or fade. Make sure you turn off the vacuum cleaner before cleaning or performing maintenance. When the dust compartment is full, please empty it immediately.
Otherwise, it may be blocked by the dirt, affecting the suction performance and causing the motor over-heated. It is recommended to replace the filter every 2–3 months. You may need to change it more ofen if it is used frequently. 13