Kuhnke E5 Rotary Solenoid Datasheet (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk E5 Series Rotary Solenoid * By using a cooling surface 300 cm 2 , the permissible duty cycle can be extended up to 1.7x normal rating M A = Initial torque M E = End torque (5 ° before end of rotary angle) Coil terminals: - Flying leads - Terminal box (6.3 DIN 46247) Weight: appr. 570 g Dyn. moment of inertia (rotational mass): appr. 4.25 10 --6 kg m 2 Time constant: appr. 7–24 ms All solenoids with M A > 2.5 Ncm are available with spring return, with a rating of M R = 2.0 Ncm approximately. The operational voltage of 205 V DC results from rectifying 230 V AC with a bridge rectifier.

ca.30,5 30 Document RSE500/13 Revision 00 2 19 Ш6 h9 ca. 72 M4 ca. 60 5 Ш35 35 20 ± 0,5 50 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Voltage ratin g V DC 24 205 V DC V oltage rating ED* LK % 100 75 45 25 15 7 100 70 45 20 9 6 % ED* LK Current ratin g A 0,80 0,96 1,55 2,45 3,90 9,20 0,08 0,12 0,18 0,35 0,77 1,18 A C urrent rating Nominal resi stance  30,0 25,0 15,5 9,8 6,2 2,6 2.600 1.735 1.148 592 268 174  Nomin al resistance E 52, 25° MA Ncm 13,0 18,5 15,0 21,5 20,0 26,0 25,0 30,0 31,0 34,0 41,0 41,0 10,5 16,5 14,5 21,0 18,5 25,0 26,0 31,0 36,0 37,0 40,0 40,5 Ncm MA E 52, 25° ME Ncm Ncm ME E 53, 35° MA Ncm 10,0 18,0 11,5 19,5 16,0 23,5 22,0 27,0 27,0 29,0 36,5 31,0 8,0 15,5 11,0 19,0 15,0 22,0 23,0 27,5 32,0 30,5 36,0 31,0 Ncm MA E 53, 35° ME Ncm Ncm ME E 54, 45° MA Ncm 7,0 15,6 8,1 17,2 11,5 20,8 16,4 23,0 21,0 25,5 30,5 27,5 5,4 13,3 7,8 16,6 10,5 20,0 17,0 24,0 26,0 27,0 30,0 27,0 Ncm MA E 54, 45° ME Ncm Ncm ME E 56, 65° MA Ncm 3,9 14,5 4,8 15,7 7,2 18,5 10,5 21,0 14,5 22,0 24,0 22,5 3,0 12,3 4,5 15,0 6,5 18,0 11,3 21,3 19,0 22,5 23,5 22,5 Ncm MA E 56, 65° ME Ncm Ncm ME E 59, 95° MA Ncm 1,8 12,7 2,2 13,7 3,6 15,2 5,4 16,1 8,0 16,5 14,4 15,0 1,5 11,3 2,1 13,4 3,2 14,8 5,9 16,3 11,0 16,0 14,2 15,0 Ncm MA E 59, 95° ME Ncm Ncm ME

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk E5 Series Ordering Information Order specifications Rotary solenoid Angular travel 25 ° 35 ° 45 ° 65 ° 95 ° Shaft design Coil terminals Terminal box 2) Flying leads (20 cm standard length) Standard voltage Nominal voltage (connected to 230 V AC with Si-bridge rectifier) Perm. duty cycle under air cooled conditions (LK) 2) Suits push-on connector 6.3 DIN 46247 and plug-in socket Z 801. Insulation class: B (max. permissible temperature = 130 ° C) Test voltage: 2500 V (eff) Accessories:

Plug-in socket Z801 Document RSE500/23 Revision 00 2 41,0 10,0 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm 5,5 34,2 Plug-in socket Z811 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier (30,5) Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. E 5 4 -LO L- - N - 24 V DC 100 % ED E 5 2 3 4 6 9 -LO L- F N 24 205 100 % ED Ø 1

Стр. 2

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk E5 Series Shaft & Rotation Options Document RSE500/33 Revision 00 2 United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Normal Spring return LOO LOL LOR ROO ROL ROR BOO BOL BOR Spring return ØD LF Shaft designs The following types of rotary sole- noids are available. Resulting in the following abbrevia- tions for ordering: 1.

letter Direction of rotation (facing the out- put shaft) L anti-clockwise rotation R clockwise rotation B shaft extensions both ends 2. letter Centering shoulder O standard type without mounting ring R optional L optional 3.

letter Return spring – the torque exerted by the spring is to be subtracted from the torque values given in the data sheets L on the anti-clockwise shaft end R on the clockwise shaft end O no return spring fitted B both sides Example 1 anti-clockwise rotation, no return spring, standard shaft length LOO - Example 2 shaft extensions on both ends, return spring on anti-clockwise rotation end BOL - Spring return arrangement (with protection cap) Spring return ØD LF Solenoid size h10 Mounting ring Dimensions in mm Ø D E5 21, 0 ØD M ounting ring LF 6,0 Ø Dh10 19,0 LZ LZ 3,0 Impulse Automation Limited Normal Spring return LOO LOL LOR ROO ROL ROR BOO BOL BOR

Стр. 3