Kuhnke URM50 Bi-directional Linear Solenoid Datasheet (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk URM50 Series Bi-d irectional Linear Solenoid Linear solenoid Order specifications Design type Coil terminals Plug-in socket connection 1) Flying leads (10 cm standard length) Nominal voltage (standard voltage) 2) Perm. duty cycle under air cooled conditions (LK) 1) For socket 6.3 DIN 46247 2) Other voltages are available on request up to 230 V DC Weight: Complete solenoid: appr. 1200 g Armature: appr. 180 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: B (max. permissible temperature = 130 ° C) URM50-N 24V = 100% ED Long life expectancy through plastic bobbin armature bearing.

Plug Z803 available as accessory. 3) If solenoid is mounted directly onto a flat metal surface, an increase in relative duty cycle is permissible (please ask for advice) 1000 %ED Document LNSUR5/12 Revision 00 2 500 5 100 200 Force vs. Stroke diagram F = f (s) 15 F/N 50 25 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 20 100 70 40 10 stroke s = 0 corresponds to armature in fully home position 0 2 4 6 8 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. URM 50 – N – 24 V DC 100 % ED URM 50 F N 24 100 % ED 100 70 4 0 25 15 5 % Perm. duty cycle (ED)3) 15 24 3 8 56 89 280 W Nominal coil power Pn

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk URM50 Series Bi-d irectional Linear Solenoid M5 1 2 1 2 3 Plug allocation Dimensions given when system 1 current-carrying Direction of stroke 41,0 10,0 Plug-in socket Z80 3 Screw joint PG 9 for lead diameter 4.5 - 7 mm Document LNSUR5/22 Revision 00 2 34,2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

30 ca.52 19 15+1 15+1 M5 ca.72 ca.60 1 2 M4 M4 6 6 Ø40 30 104 Ø50 156 1 2 M4 M4 6 6 30 104 156 1 2 ca.60 9,0 Ø 1 5,5

Стр. 2