Руководство по эксплуатации Kuhnke RM050 Linear Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk RM050 Series Linear Solenoid Push and/or Pull Type Heavy duty linear solenoid RM 050 Weight: Complete solenoid: appr. 610 g Armature: appr. 200 g Standard: Voltage: 24 V DC Flying leads: 20 cm Insulation class: F (max. permissible temperature = 155 ° C) Service-free DU armature bearing for maximum durability. Stroke of version with standard stroke limiter: 10 mm. 1) If solenoid is mounted directly onto a flat metal surface the duty cycle can be extended (please ask for advice) 1000 %ED Document LNSRM5/15 Revision 00 2 500 Force vs.

Stroke diagram F = f (s) 200 5 100 W = horizontal characteristic 50 35 25 15 Force measured when operating in horizontal position, at 90 % rated voltage and winding at operating temperature F/N 60 20 100 stroke s = 0 corresponds to armature in fully home position 10 0 2 4 6 8 10 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. 100 60 35 25 15 5 % Perm.

duty Cycle (ED)1) 20 30 55 70 115 300 W Nominal coil power Pn 40 15 ms Actuation time (ED)

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk RM050 Series Linear Solenoid Push and/or Pull Type M5 Dimensions given with armature in fully home position Dimensions given with armature in fully home position Direction of stroke Direction of stroke Ш50 M5 Ш34 28 5 32 5 M4 135 Document LNSRM5/25 Revision 00 2 65 ~ 32 65 7 Ш30 M5 Ш4,8 Ш34 Ш50 Ш40 30 50 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

without stroke limiter Ø34 16+1 5 5 50 50 50 135 5 ~17 5 7 16+1 41 36 M5 Ø30 Ø34 Ø4,8 M4 Ø40 Ø30 19 30 50 42 Ø40 Ø30 Ø30 50 5 5 M 36 50 42 with stroke limiter 16+1 5 10 16+1 72 Ø30 19 42

Стр. 2

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk RM050 Series Ordering Information 2) See below 3) Opposite to electrical connection 4) Same side as electrical connection 6) For plug-in socket 6.3 DIN 46247 and plug 200 +15 Z801 and Z811 Coil terminals N F Examples of design types: Direction of stroke Document LNSRM5/35 Revision 00 2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

RM 050 – W – O R O R – N – 24 V DC 100 % ED Ord er specifications RM Line ar solenoid series 050 Des ign type ø mm W Hor izontal frontal force vs. stroke output Des cription2) O Stroke limit without H with R Plunger right hand side3) B both sides O Flange without R right hand side3) L left hand side4) O Gaiter without R right hand side3) L left hand side4) B both sides F Coi l terminals Flying leads (20 cm standard length) N plug-in socket connection6) 24 Op erating voltage 24 V DC 205 205 V DC (connected to 230 V AC with SI- bridge rectifier) 100 % ED Per m. duty cycle under air cooled conditions (LK) ca.12 ca.12

Стр. 3

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk RM050 Series Accessories 41,0 10,0 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm 5,5 34,2 Plug-in socket Z811 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier (30,5) Flange (Mounting screws are part of the shipment) ШJ ШG ШЕ ШF ШD Order specification C B H Document LNSRM5/45 Revision 00 2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Ø 19,0 ØI ØL K A ØI ØL K A ØL K Order Dimensio ns (mm) Dimensi ons (mm) Order number Type A B C D E F G H I J K L Type number Z 839 RM 050 50,0 7,0 12,0 30,0 23,0 30,0 – – 4 ,8 4,3 42,0 40,0 RM 050 Z 839

Стр. 4