Руководство по эксплуатации Kuhnke V30 Linear Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk V30 Series Linear Solenoid Push & Pull Type Order specifications Linear solenoid Design type Coil terminals Plug 1) Flying leads (10 cm standard length) Nominal voltage (standard voltage) 2) Perm. duty cycle under air cooled conditions (LK) 1) Suits plug-in socket 6.3 DIN 46247 2) Other voltages are available on request up to 230 V DC Weight: Complete solenoid: appr. 285 g Armature: appr. 28 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: E (max. permissible temperature = 120 ° C) V30-N 24 V DC 100% ED Accessories: Plug-in socket part no. Z801 and Z811 Metal case Terminal box:

6.3 DIN 46247 3) If solenoid is mounted directly onto a flat metal surface of at least 300 cm 2 , the duty cycle can be extended up to 1.3 x nominal rating 50 40 %ED Document LNSV30/12 Revision 00 2 F/N 20 10 6 Force vs. Stroke diagram F = f (s) 5 40 25 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 2 83 1 100 stroke s = 0 corresponds to armature in fully home position 0 2 4 6 8 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. V 30 – N – 24 V DC 100 % ED V 30 F N 24 100 % ED 100 85 40 25 6 % Perm. duty cycle (ED)3) 9,2 11 21 33 128 W Nominal coil power Pn

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk V30 Series Linear Solenoid Push & Pull Type ca.52 18 8 Dimensions given with armature in fully home position Direction of stroke 41,0 10,0 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm Document LNSV30/22 Revision 00 2 34,2 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier Plug-in socket Z811 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. 22 15 ca.40 4 15+1 M4 Ø10 19 30 Ø4 M3 ca.16 4 4 10 52 26±0,5 93,5±0,4 ca.40 30 4 4 10 52 26±0,5 93,5±0,4 4 52 9,0 Ø 1 5,5

Стр. 2