620 Instru ction Manual of Lifan Sedan LIFAN 620 Instru ction Manual of Lifan Sedan LIFAN Air Vent Mode Setting Operating Essentials ●To quickly cool down the car which has parked under hot sunshine, drive it for several minutes with window open. ●Make sure that the inlet grille in front of the windshield is not blocked by things like leaves or snow. ●In wet weather, don't let cold air blow to the windshield, since the temperature difference inside and outside of it will help mist growing. ●The lower part of front seats should be kept as open space to ensure full air circulation in the car.
●In cold weather, it is necessary to set a high rotation speed of blower for one minute to clean the snow or moisture in the air inlet passage, thus to reduce the mist growing on windows. F R O N T ●When driving your car after other cars on the dirty road, or under windy or dusty condition, it is recommended to temporarily set the selector button for inner and outer circle mode at inner circle and set the rotation speed selector of blower at any position. 93 Heating For an optimal effect, set the controller ●During defrost or demist of windshield, ●For a quick temperature decrease, turn at:
select defrost, demist and down vent for the selector button for inner and outer circle temperature increase in the car. mode at inner circle for several minutes. As for automatic operation A/C Ventilation Pres s the button for automatic mode. For an optimal effect, set the controller For an optimal effect, set the controller Temperatu re—set at the temperatu re at: at: needed Fan rotation speed—set at the rotation Inlet—outer circl e (ai r outside) As for automatic operation speed needed A/C—shut down Temperature—toward low temperature Press the button for automatic mode.
As for manual operation Temperature—set at the temperature Inlet—outer circle (air outside) needed Air flow—central and side vents Fan rotation spe ed—set at the rotation Inlet—outer circle (air outside) spe ed needed A/C—shut down Temperature—toward high temperature As for manual operation Inlet—outer circle (air outside) Air flow—down ven t Fan rotation speed—set at the rotation A/C—shu t down speed needed Temperature—toward low temperature ●For a quick temperature increase, turn Inlet—outer circle (air outside) on the inner circle for several minutes.
To Air flow—central and side vents avoid mist growing on windows, after the A/C—start up temperature rises to certain degree, turn on the outer circle. 94 Chongqing Lifan Passenger Vehicle Co., Ltd.