TRANSFER CASE - TOD 5D2-29 DIAGNOSTIC TROUBLE CODES (DTC’s) Diagnostic Trouble Code Retention The first time a fault is detected a DTC is stored in the TOD’s Non-Volatile memory. This DTC will remain in memory until the TOD is instructed to erase DTC’s by SCAN-100. DTC’s will not be erased by disconnecting power to the TOD.
Diagnostic Trouble Code Assignments SSANGYONG Y200 Classification Fault Code Description TOD 1714 EEPROM Checksum Fault 1715 TPS Loss of Signal 1716 TPS Out of Range EMC 1721 EMC Open / Short to Battery 1722 EMC Short to ground Speed Sensor 1731 Front Speed Sensor Voltage Low 1732 Front Speed Sensor Voltage High 1733 Rear Speed Sensor Voltage Low 1734 Rear Speed Sensor Voltage High 1735 Speed Sensor Reference Voltage Low 1736 Speed Sensor Reference Voltage High Shift Motor 1741 Motor Open / Shorted to Battery 1742 Motor Output Shorted to Ground 1743 Shift System Timeout Position Encoder 1750 General Position Encoder Fault (Invalid Code) 1751 Position 1 Shorted to Ground 1752 Position 2 Shorted to Ground 1753 Position 3 Shorted to Ground 1754 Position 4 Shorted to Ground