TRANSFER CASE - TOD 5D2-53 SSANGYONG Y200 Step Action Value Yes No 7 Measure the resistance between terminals of the male white 7-pin connector. • Terminal 6 and terminal 3 • Terminal 6 and terminal 2 • Terminal 3 and terminal 2 • Terminal 7 and terminal 5 • Terminal 7 and terminal 1 • Terminal 5 and terminal 1 Is the measurement within specified range? 5 ~ 6 MΩ 5 ~ 6 MΩ 9 ~ 10 kΩ 5 ~ 6 MΩ 5 ~ 6 MΩ 9 ~ 10 kΩ Go to Step 9 Go to Step 8 8 Replace front or rear propeller shaft speed sensor. Is the repair complete? - System OK - 9 1. Replace the TOD. 2. Turn the ignition switch to OFF. 3. Connect the scan tool to data link connector (DLC) and follow the directions given in the scan tool manual.
4. Turn the ignition switch to ON. 5. Delete and request DTC with scan tool. Is the repair complete? - System OK -