F3B ENGINE 165 T RAKKER E URO 4/5 543422 ELECTRO-MAGNETIC FAN DRIVE REPLACEMENT Removal Figure 24 87382 Tocut off the batteries, remove the electric wires or openthe main switch. Remove the two sleeve fastening screws to the intercooler radiator (5). Lift the calender and tilt the cabin. Remove nut (16), then disconnect electric cable (17). Slacken the clamp (15) and remove the air conveyor (9) from the turbocharger (18) and from the intercooler radiator (5). Go under the vehicle and remove the plug (13) from the radiator (14) and drain the coolant fluid in the appropriate container. Slacken the sleeve (6) fastening clamp (7) from the intercooler (5) radiator.
Remove the clip (11) and disconnect the radiator (12) sleeve (14). Drive in the suitable self-threading screw in the pin hole (2) taking care to partially take off and finally remove with a screwdriver the upper clip (3) fastening the fan air (4) conveyor to the radiator guard (1). Remove the climate control system pipe (8) fastening screw (if fitted) to the air conveyor (9). Remove the air conveyor (9) fastening screws (10) from the support bracket. Remove the lower clip in the same way. Print 603.93.641 Base q November2006