F3B ENGINE 243 T RAKKER E URO 4/5 542410 Turbocharger HOLSET HX 50W Figure 258 71766 The turboblower is of the type equipped with pressure relief valve. It is essentially made up of: 54249 WASTEGATE Wastegate check and calibration Cover the air, exhaust gas and lubricating oil inlets and outlets. Make a thorough cleaning of the turb oblower outside by using an anti-oxidant and corrosion-proof fluid.
- a central body which incorporates a shaft supported by bushings at the opposite ends of which the turbine impeller and the compressor rotor are fitted; - a turbine body and a compressor body, both of which mounted on the central body end; - an overpressure relief valve fitted to the turbine body. The function of this valve is to choke the exhaust gas outlet, by conveying part of the gas directly into the exhaust pipe, when the boosting pressure downstream the compressor reaches the calibration value.
REPAIRS NOTE If anomalous engine operation is found, which is due to the boosting system, it is advisable that you check theefficiency ofseal gaskets and the fastening of connecting sleeves prior to carrying out the checks on the turboblower. Also check for obstructions in the sucking sleeves, air filter and radiators. If the turboblower damage is due to lacking lubrication, check that the oil circulation pipes are not broken or clogged; if so, replace them or eliminate the trouble. Print 603.93.641 Base q November 2006