Failing Type of Checks to be Measuring Values to be DTC FMI Visible failure Possible Cause Repair action Remarks component Failure performed conditions detected 1C2 ERROR No effect per- CAN messages Check the ETC con- MESSAGE ceived by the from ETC (gear- nection with the CAN CAN ETC1 driver. box) inconsist- line. ent. 1C3 TIMEOUT No effect per- CAN messages Check the TCO con- IN RECEIV- ceived by the from TCO in- nection with the CAN ING TC01 driver. consistent. line. CAN MESSAGE 1C6 ERROR No effect per- CAN messages Check the TCU con- MESSAGE ceived by the from TCU nection with the CAN CAN driver. (Transmission line. TSC1-PE Control Unit) in- consistent.
1C8 ERROR No effect per- CAN messages Check the TCU con- MESSAGE ceived by the from TCU nection with the CAN CAN driver. (Transmission line. TSC1-VE Control Unit) in- consistent. 1D1 ECU No effect per- Electrical inter- If the error persists to OVERRUN ceived by the ference or inter- replace ECU. MONI- driver. nal control unit TORING problems. ERROR 1D2 ECU No effect per- Poor control Reprogram the central OVERRUN ceived by the unit program- unit. If the error is re- MONI- driver. ming/flash peated, replace the TORING Possible internal central unit, if needed. ERROR fault. 1D3 ECU No effect per- Poor control Reprogram the central OVERRUN ceived by the unit program- unit.
If the error is re- MONI- driver. ming/flash peated, replace the TORING Possible internal central unit, if needed. ERROR fault. DTC FMI Failing component Type of Failure Visible failure Possible Cause Repair action Checks to be performed Measuring conditions Values to be detected Remarks 1C2 ERROR MESSAGE CAN ETC1 No effect per- ceived by the driver. CAN messages from ETC (gear- box) inconsist- ent. Check the ETC con- nection with the CAN line. 1C3 TIMEOUT IN RECEIV- ING TC01 CAN MESSAGE No effect per- ceived by the driver. CAN messages from TCO in- consistent. Check the TCO con- nection with the CAN line. 1C6 ERROR MESSAGE CAN TSC1-PE No effect per- ceived by the driver.
CAN messages from TCU (Transmission Control Unit) in- consistent. Check the TCU con- nection with the CAN line. 1C8 ERROR MESSAGE CAN TSC1-VE No effect per- ceived by the driver. CAN messages from TCU (Transmission Control Unit) in- consistent. Check the TCU con- nection with the CAN line. 1D1 ECU OVERRUN MONI- TORING ERROR No effect per- ceived by the driver. Electrical inter- ference or inter- nal control unit problems. If the error persists to replace ECU. 1D2 ECU OVERRUN MONI- TORING ERROR No effect per- ceived by the driver. Poor control unit program- ming/flash Possible internal fault. Reprogram the central unit. If the error is re- peated, replace the central unit, if needed.
1D3 ECU OVERRUN MONI- TORING ERROR No effect per- ceived by the driver. Poor control unit program- ming/flash Possible internal fault. Reprogram the central unit. If the error is re- peated, replace the central unit, if needed.