Iveco — 603.93.641-3Cp

16/4 T RAKKER E URO 4/5 GEARBOXESZF 16 S 1620 T.D. - 2220 T.D. - 2520 T.O. EPICYCLIC REDUCTION GEAR CONTROL Reduced speeds  Figure 2/4 PNEUMATIC SYSTEM DIAGRAM OF REDUCED SPEED ENGAGEMENT 86338 The air from the vehicle s pneumatic system is reduced to a pressure of 9.5 bars by the pressure reduction unit (1). It then supplies the inhibitor valve D . The movement of the piston causes th e contact of the electric switch to close, which turns on the indicator light in the cab with the tortoise symbol.

Now, taking the control lever onto the reduced speed position (1 st H), the body A , integral with the speed control rod, opens the valve E that, via the pipe F , supplies the cylinder G . The piston of the cylinder G , moving to the right, activates the ERG. NOTE The reduced speeds can be used in bot h slow range and fast range conditions, depending on the position of the pre-selector. At the same time, the valve B closes, making it possible for the air from the pipe C to discharge into the atmosphere. Print 603.93.641/A Revi - June 2007