Print 603.93.641/A Revi - June 2007 TRAKKER EURO 4/5 GEARBOXESZF 16 S 1620 T.D. - 2220 T.D. - 2520 T.O 18/1 nt603. 93.331/A GEARBOX Main and transmission shaft bearing and fi- xed hub assembly tempature 100 End float: - ERG* planet wheel shaft bearing - ERG* fixed hub split ring - Transmission shaft bearing split ring with adjusting ring without adjusting ring 0 0.1 mm 0 0.26 mm 0 0.1 mm 0 0.1 mm End float of gear of drive input shaft, first, second and third speed minimum 0.2 mm Fourth speed gear end float minimum 0.05 mm End float between planet wheel holder and ERG* planet wheels 0.4 1.3 mm End float of bearings of shafts:
main and transmission on drive input side 0.0 0.1 mm Main shaft rear bearing split ring end float 0.0 0.05 mm Wear limit check distance of synchronizer rings: - first/second speed - third/fourth speed - ERG * 1.5 mm at 50 Nm (5 kgm) 0.8 mm 1.2 mm Reverse gear idler end float 0.4 1.5 mm End float or pre-load of half rings of main and drive input shafts from - 0.05 to + 0.05 * ERG = Epicyclic reduction gear unit