T RAKKER E URO 4/5 61231 of the spring (5) and washer (4), the spring 61232 61233 arrow. (6) to make it come Print 603.93.641/A Revi - June 2007 22/2 GEARBOXESZF 16 S 1620 T.D. - 2220 T.D. - 2520 T.O. Figure 6/5 Figure 6/8 61229 Unscrew the screws (1) and take off the top cover (2). Remove the circlip (2) from the rod (1 Extract the pin (3). Use the washer (4) to limit the action remove the split ring (3), extract the w (5) and the washer (6). Figure 6/6 Figure 6/9 61230 Take off thecirclip (3) and extract the piston (2)together with Remove the circlips (1) and take out the the ring (1). drive (4) to the rod (3).
Figure 6/7 Figure 6/10 61259 Unscrew the plugs (2) with the washers, extract the springs Move the sleeve (1) in the direction of (1) and remove the levers (6). Strike a punch on the top of the lever If necessary, take out the pins (3). out of the bearing (3) and pin (2), freein groove (4) in the rod (5). Unscrew the screws (4) and remove the cover (5). Unscrew the screws (1) and take off t Extract the pin (3). Figure 6/6 Take off thecirclip (3) and extract the p the ring (1). Figure 6/7 Remove the circlip (2) from the rod (1 Use the washer (4) to limit the action remove the split ring (3), extract the w (5) and the washer (6).
Figure 6/9 Remove the circlips (1) and take out the drive (4) to the rod (3). Figure 6/10 Unscrew the plugs (2) with the washe (1) and remove the levers (6). If necessary, take out the pins (3). Unscrew the screws (4) and remove t Move the sleeve (1) in the direction of Strike a punch on the top of the lever out of the bearing (3) and pin (2), freein groove (4) in the rod (5).