Iveco — 603.93.641-3Cp

22/9 T RAKKER E URO 4/5 GEARBOXESZF 16 S 1620 T.D. - 2220 T.D. - 2520 T.O.  Figure 6/40 Figure 6/43 19527 Take off the ring (2) and separate the ring gear (3) from the mount (1). With an extractor composed of bridge 99341003 (1), brackets 99341015 (2), reaction part 99345058 (3) and clamp 99341015 (4), extract thehub (6) forthe sliding sleeve from the ERG shaft (5). 61252 Figure 6/44 Figure 6/41 71118 Take off thespacer (2), push thespring pins (4) inside thepins (3) and, with an appropriate drift, extract the pins (3) from the planet wheel shaft (1). Extract the planet wheels (7) together with the adjustment rings (5-8) and rollers (6) from the planet wheel shaft (1).

Remove the synchronizer ring (1) and the coupling body (3) together with the plate (2) from the ring gear (4). 61220 Levering under the coupling body (3), extract this from the plate (2). Figure 6/42 Fitting the epicyclic reduction gear unit (ERG) To fit the epicyclic reduction gear unit, carry out the steps described for removal in reverse order. The operations and assembly phases requiring specific tools, clearance checks, adjustments or special precautions are described below.The tightening torques are given in the specific table. Remove the ring gear (1) from the planet wheel shaft (2). 71117 Print 603.93.641/A Revi - June 2007