P200 mA Range Sets the range for the mA output. Entry: 1 = 0 - 20 mA 2 = 4 - 20 mA P201 mA Function Assigns the mA output to track one of the integrator functions. Entry: 1 = rate 2 = load 3 = speed P212 mA Min Limit Limits the lower mA range (0 or 4 mA) to a minimum output value. Enter limit value, range 0 - 22. P213 mA Max Limit Parameters Limits the upper mA range (20 mA) to a maximum output value. Enter limit value, range 0 - 22. P214 4 mA Trim Adjusts the 4 mA output level to agree with a milliammeter or other external mA input device. Enter trim value, range 0 - 9999. P215 20 mA Trim Adjusts the 20 mA output level to agree with a milliammeter or other external mA input device.
Enter trim value, range 0 - 9999 P220 mA Output Damping Sets the speed at which the mA output reacts to change. The greater the damping value, the slower the response. If the value is 0, the mA output assumes the damping set in P080. Enter the damping value, range 0 - 9999 End of mA output parameters. Page 54 Milltronics BW100 - INSTRUCTION MANUAL 7ML19985DJ01