hp Color 9850mfp EXTERIOR 1.4 Angle adjustment of the operation board Note: • The operation board can be set at the two steps of 7 and 18 degrees depending on the front cover 2 provided or not provided. When the front cover 2 provided: 7 degrees When the front cover 2 not provided: 18 degrees A. Procedure 1. Open the front door [1] and the toner supply door [2]. [4] [3] [5] [3] 2. Remove 2 screws [3] and release the fixing of the operation board [4]. 3. With the operation board raised up, remove the front cover 2 [5] (when the angle is changed 4. Fasten the operation board [4] with 2 screws [3]. from 7 to 18 degrees). III DIS./ASSEMBLY 5.
Close the front door [1] and the toner supply door [2]. Note: [2] • When changing the angle of the operation board from 18 to 7 degrees, install the front cover 2 by following Step 3. [1] 3-7