hp Color 9850mfp WRITING 4. Remove 5 relay connectors [1]. 5. Remove 10 screws [2] and then remove the fan [2] [2] holder R [3]. [2] [1] [2] [3] 6. Remove 2 screws [1] and then remove the write pressing board [2] while pressing it downward. [3] [1] 7. Remove 2 screws [3] and then remove 2 write cooling ducts [4]. III DIS./ASSEMBLY Note: • Be sure to hold the upper half of the write pressing board when removing it. [4] [2] [3] 8. Remove the connectors [1], 2 each, and then remove the write unit Y [2], write unit M [3], [1] [2] write unit C [4] and the write unit K [5]. [1] 9. Reinstall the above parts following the removal [3] steps in reverse. [4] [5] [1] [1] 3-27