hp Color 9850mfp PAPER FEED TRAYS 1 to 3 Note: • Be sure to wind the wires around the pulley [14] so that the wire C [3] comes to the out- side and the wire D [10] to the inside. 6. Install the wires A [17] and B [18] by following Steps 1 to 5. Note: • After completion of attaching the wires, be sure to rotate the up/down drive shaft by hand to check to see if the up/down plate goes up and down smoothly. 7. For the subsequent steps, reinstall the parts fol- lowing the removal steps in reverse. III DIS./ASSEMBLY 3-67