FIXING hp Color 9850mfp B. Procedure (for replacing the fixing tempera- ture sensor 4) 1. Remove the fixing unit. 2. Remove 2 screws [1] and then remove the fixing entrance plate L [2]. [2] Note: • Be careful not to damage the paper passage section of the fixing admission plate L [2]. [1] 3. Remove 2 clamp screws [1], connector [2] and a screw [3], and then remove the fixing tempera- [1] ture sensor 4 [4]. III DIS./ASSEMBLY Note: • When reinstalling it, be sure to check that the [3] sensor section of the fixing temperature sen- sor 4 is in touch with the fixing roller. 4. Reinstall the above parts following the removal steps in reverse. [4] [2] C.
Procedure (for removing and reinstalling the fixing temperature sensor 2) [1] 1. Remove a clamp screw [1], connector [2] and 2 screws [3], and then remove the mounting board [4] of the fixing temperature sensor 2. [3] [2] 3-94