hp Color 9850mfp FIXING • When reinstalling it to the fixing unit, be sure to press it against the paper exit side [2] hori- [1] [2] zontally while being careful that the paper entrance prevention plate [1] does not get in touch with the roller. This is because the paper entrance prevention plate may cause damage to the roller. 4. Reinstall the above parts following the removal steps in reverse. Note:
• After replacing the fixing cleaning unit, be sure to reset the count of the fixing cleaning unit in accordance with the 25 mode "Parts counter - Count of special parts." If not, a problem such as image smudge may arise because the web feed amount becomes plays the message "The fixing cleaning unit is less than the set value or the engine dis- III DIS./ASSEMBLY require to be replaced. Contact the service manager or the authorized distributor” and is disabled to copy or print. 3-101