REGISTRATION/ADU/REVERSE/PAPER EXIT hp Color 9850mfp 7. Remove the E-ring [1] and then remove the reg- istration gear [2] and the pin [3]. [5] [6] Note: • When reinstalling the registration gear [2], be sure to attach the pin [3] without fail. 8. Remove 2 registration pressure springs [4]. [7] [4] 9. Remove 2 E-rings [5] and 2 bearings [6] and then remove the registration roller [7]. 10. Reinstall the above parts following the removal steps in reverse. Note: • When reinstalling the registration unit, be careful not to damage the paper passage of [3] the guide plate. • Make sure to replace the registration pressure III DIS./ASSEMBLY springs to the original position. [6] [1] [2] [5] [4] 3-110