PAPER FEED Q3228A C. Original swing-back control Original is positioned for scanning by this function. Original is conveyed beyond the original positioning plate, conveyance motor (M302) is stopped when the specified time elapses after the timing sensor (PS302) turns OFF, the motor starts reversing to return the original, and the original is struck against the original positioning plate and stops. fore thin paper mode is available to be used for setting the original.
Striking control differs between thin paper and others (paper of normal thickness and thick paper), there- II UNIT EXPLANATION [2] [3] [4] [5] [1] [1] Original striking position [4] Strike the paper against the expected position- ing point conveying the paper at a low speed. [2] Paper conveyance [3] Stops after the paper trailing end passes [5] Positioning completed through the expected positioning point. 2-6