Q3228A EXTERIOR III DISASSEMBLY/ASSEMBLY Caution: • Make sure the power cord of the MFP is assembly or assembly. unplugged from the power outlet before dis- 1. EXTERIOR 1.1 RADF hinge opening / closing angle adjustment A. Replacing 70-degree and 40-degree fixtures 1. Untighten 4 screws [1] and remove 2 hinge opening/closing angle adjusting fixtures [2]. [1] Fixtures are for 70 or 40-degree use and can be distinguished by the stamp on them. 2. Install 2 hinge opening/closing angle adjusting fixtures [2] and retighten 4 screws [2] positively. III DIS./ASSEMBLY [2] 3-1