Q5686A/Q5687A DISASSEMBLY/ASSEMBLY 5. After removing 2 screws [3] of the sensor cover [2] of the stapler F [1] and 3 clamps [4], remove [1] a ground screw [5] and the connector [6]. Note: • When reinstalling the sensor cover [2], be [2] [4] careful that the wiring harness does not inter- fere with the stapler rotation HP sensor (PS713) [7] or get caught by the gear. [6] [3] [5] [7] 6. After removing 4 screws [1], take out the stapler R [2] and remove the connector [3]. [1] Note: [2] • When taking out the stapler R [2], be careful not to damage PS713 [4]. III DIS./ASSEMBLY 7. Reinstall the above parts following the removal steps in reverse. [1] [3] [4] 3-25