PAPER FEED Q5690A 1.2.3 Paper feed assist fan control being fed. The fan turns on/off at the same timing as the paper feed motor (M101). Some of the side guides (at front and rear) are provided with a fan to assist the handling of paper while is The auto-mode has been set when the engine was shipped from the factory, and this air assist turns on when the coated paper is selected.
of paper" and "OFF at all times." The 25 mode DIPSW allows the mode to be switched among "ON for coated paper only," "ON for all types II UNIT EXPLANATION [5] [6] [4] [2] [1] [3] 1.2.4 Mis-centring adjustment control In combination with the paper feed sensor (PS107), the mis-centering sensor (PS120) detects the position of paper in conveyance. The image processing section uses this information for writing so that an original to be read comes at the same position as paper. The contact-type sensor of PS120 detects the paper edge position along the main scan, and the PS107 detects the leading edge of paper to be used for correction along the sub-scan. 2-4