Post insertion kit (Q3636A) product specifications Type Upper tray copy sizes Sheet feeder employing torque-limiter separation G Metric area A4, A4R, B5, B5R, A5 Functions G Inch area Automatic sheet feed (online operation) Letter, Letter R, 5.5 by 8.5 The Q3636A automatically feeds sheets into the finisher in accordance with instructions from the MFP. Lower tray copy sizes G Metric area A3, B4, A4, A4R, B5, B5R, A5, F4 wide paper (314 mm by 445 mm maximum) Manual sheet feed (offline operation) User feeds sheets into finisher by operating the PI control panel.
G Inch area Ledger, 8.5 by 14, Letter, Letter R, 5.5 by 8.5, wide paper (314 mm by 445 mm maximum.) User can select from the following four finishing modes Single-staple mode (staple at rear) Paper staking capacity Two-staple mode (flat stapling) Punch mode (with punch kit) Up to 200 sheets (when using 128 g/m 2 or 28 lb-equivalent paper) to maximum. height of 30 mm Staple-and-fold mode (available only if mounted to the Q3634A) Tri-fold mode (available only if mounted to the Q3634A) Paper curling Maximum 10 mm Manual sheet feed is only available with the lower tray. This is not allowed for wide papers.
Copy paper Plain paper 60 to 90 g/m 2 or 17 lb to 24 lb high-quality paper, recycled paper Power, weight, dimensions Power source Special paper 24 VDC, 5 VDC (supplied from finisher) G 50 to 59 g/m 2 or 13 lb to 16 lb high-quality paper, recycled paper Maximum power G 91 to 200 g/m 2 or 24 lb to 45 lb high-quality paper, recycled paper Weight 30 VA Printing paper Maximum 10.5 kg G Double-sided art paper External dimensions G Mat coating paper G High-quality paper Approximately 511 mm (W) by 620 mm (D) by 220 mm (H) 2 Post insertion overview ENWW 5 sheets Amount of curl