Punch mode Metric area (4 holes / Swedish 4 holes) A3 / B4 / A4 / B5 / Ledger / Letter Maintenance Maintenance Same as the MFP Punch kit overview Inch area (3 holes) Ledger / Letter / A3 / B4 / A4 / B5 Operating environment Inch area (2 holes) Ledger / Legal / Letter / Letter R 5.5 by 8.5 / 5.5 by 8.5R A3 / B4 / A4 / A4R / B5 / B5R / A5 / A5R / F4 Temperature 10 ° C to 30 ° C (50 ° F to 86 ° F) Humidity 10 percent to 80 percent RH Punch mode with A5R or 5.5 by 8.5R size paper cannot be used together with the stapling mode Note The information herein may be subject to change for improvement without notice.
High quality paper of 64 g/m 2 to 128 g/m 2 or 16 lb to 24 lb Punch mode cannot be used together with the fold mode, staple-and-fold mode, or tri-fold mode. Media not supported in punch mode Transparency, label paper, blueprint master, binding-holed paper, tabs Amount of paper curl Maximum 10 mm for 5 sheets of copied paper in piles Copied paper (5 sheets) Amount of curl Punch kit data Power source DC24V, DC5V (supplied from finisher) Maximum power consumption 40VA Punch kit dimensions 130 mm (W) by 470 mm (D) by 115 mm (H) Weight Approximately 3 kg ENWW Punch Kit product specifications 3