Punch waste conveyance control 2 Signals a Input signals 1 PS804IN (PS804 to PKDB to finisher CB) Punch waste box existence detection signal [L]: Punch waste box is not set 2 PS802IN (PS802 to PKDB to finisher CB) [H]: Punch waste box is set Punch kit unit explanation Punch waste box full detection signal [L]: Punch waste box is full Punch waste are collected in the punch waste box. [H]: Punch waste box is not full Related signals are PS802 (punch waste full) and PS804 (punch waste box set). 1 Operation a Punch waste full detection PS802 (punch waste full) detects whether the punch waste box is full.
When the punch waste box becomes full, PS802 turns on to send the punch waste full signal to the MFP. Upon receipt of this signal, the MFP displays a related message on the control panel. b Punch waste box detection PS804 (punch waste box set) detects whether the punch waste box is attached. If the punch waste box is not attached, PS804 turns off to send the punch waste box not attached signal to the MFP. Upon receipt of this signal, the MFP displays a related message on the control panel. ENWW Punch waste box section 17 5V 5V PS802 IN PS804 IN SG SG FNS CB 5V 5V PS802 IN PS804 IN SG SG PS802 5V PS802 IN PS802 SG PS804 5V PS804 IN PS804 SG PKDB PS802 PS804