Q3224A Q3224A PRODUCT SPECIFICATIONS 1 OUTLINE [1] Type Type: Upper-knife-reciprocating-type booklet edge trimming machine with large-capacity stacker Parallelism with fold: Within ± 1 mm Parallelism = A - B A [2] Functions Booklet edge trimming function: trims its edge. Number of sheets cut: Max. 32 pages (16 sheets of 80 g/m 2 paper folded into two or 15 sheets of 80 g/m 2 paper folded into two + one sheet of 200 g/m 2 cover paper) Stacker capacity: Receives the booklet made by the finisher and Folding edge B Trim edge Trimming deviation: 1 1 Bundle of sheets Folding edge Minimum Trimming Width: More than 2mm from the edge Paper size Regular sizes:
Sizes of paper that can be handled in the stapling and folding / folding mode of the Trimming deviation finisher(A3, B4, A4R, 11 x 17R, 8.5 x 14R, 8.5 x 11R) [3] Machine Specifications Power source: Wide paper: Sizes of paper supported by the engine to 5 VDC (supplied from the engine via the finisher) which the finisher is connected, but should be whithin 314mm x 445mm. 24 VDC (supplied from the DCPS mounted in this machine. The internal DCPS is compatible with 100 to 240 VAC.) Maximum power consumption: Less than 300 VA Weight: Approx. 68 kg Machine dimensions: 1279.5(W) x 610(D) x 562(H) mm Amount of paper curl: Max.
10 mm Amount of curl Copied papers (5 sheets) 1 [4] Maintenance Maintenance: Same as the engine. [5] Operating environment Temperature: 10 to 30 o C (50 o F to 86 o F) Humidity: 10 to 80%RH Note: The information herein may subject to change for improvement without notice. 1-1 Number of sheets cut Trimming deviation 2 to 10 Max. 0.5 mm 12 to 32 Max. 1.5 mm Number of sheets cut Number of stackable booklets 2 to 10 More than 100 12 to 20 More than 50 22 to 32 More than 32