Paper pick-up assembly The paper pick-up assembly is located inside the right upper cover assembly. 1 Remove trays 2 and 3. 2 Remove the right upper cover assembly (see page 238). 3 Remove the right lower cover assembly (see page 242). 4 Remove four screws, one in each corner of the paper pick-up assembly (callout 1) and pull the assembly out approximately 5 cm (2 in). 21 Figure 118. Paper pick-up assembly 5 Unplug one connector on the right that goes to the paper pick-up PCA on the right side of the paper pick-up assembly. 6 Lift out the paper pick-up assembly. Notes about reinstalling: Plug in the connector and reroute the wires before replacing the assembly. EN 267