Right cover 1 Remove the VTU (see page 302). 2 Remove two screws near the middle of the right cover (callout 1). 2 2 1 2 Figure 153. Right cover with VTU removed 3 Using a flat-blade screwdriver, release the plastic retaining tab on the upper-left corner of the cover (callout 2). 4 Carefully pull out on the top of the cover while lifting it upward to clear the retaining tabs that are along the cover’s bottom edge. Notes about reinstalling: Make sure the retaining tabs that are along the cover’s bottom edge are placed over the chassis rail. 304 Chapter 6 - Removal and replacement EN