Printable area Print areas shown in the table below are defined as follows: Non-masked area —the maximum area in which image signals are not masked by the compulsory formation of blank image area (this is the maximum area that can be addressed by the laser beam). Recommended print area —the maximum area in which image signals can be printed on media without any loss of image signals, excluding manual feed. Image assurance area —the maximum area in which print quality can be assured, including manual feed. Table 10.
Printable area specification 34 Chapter 1 - Product information EN Media type Margin Top Bottom Left Right Non-masked print area Cut sheet Envelope 2.1 mm (0.083 inch) 2.1 mm (0.083 inch) 2.9 mm (0.114 inch) 2.6 mm (0.102 inch) 3.2 mm (0.126 inch) 3.3 mm (0.130 inch) 3.7 mm (0.146 inch) 3.5 mm (0.138 inch) Recommended print area Cut sheet Envelope 3.0 mm (0.118 inch) 8.0 mm (0.315 inch) 6.0 mm (0.236 inch) 10.5 mm (0.413 inch) 4.0 mm (0.157 inch) 8.5 mm (0.335 inch) 4.5 mm (0.177 inch) 9.5 mm (0.374 inch) Image assurance area Cut sheet Envelope 6.0 mm (0.236 inch) 15.0 mm (0.591 inch) 6.0 mm (0.236 inch) 15.0 mm (0.591 inch) 5.0 mm (0.197 inch) 15.0 mm (0.591 inch) 5.0 mm (0.197 inch) 15.0 mm (0.591 inch)