Table 41. Numbered printer messages (continued) 66.22.08 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER Event log message: 66.22.08 Description: Indicates a multi-bin mailbox flipper motor error. Action: 1 Verify that the c-link and power cables are connected. 2 Turn the printer off and on to reset the printer. 3 Check for jams in the flipper assembly area. 4 Replace the flipper assembly. 5 Replace the multi-bin mailbox controller board PCA. 66.22.09 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER Event log message: 66.22.09 Description: Indicates a multi-bin mailbox external memory error. Action: 1 Verify that the c-link and power cables are connected.
2 Turn the printer off and on to reset the printer. 3 Replace the multi-bin mailbox controller board PCA. 66.22. OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER Event log message: 66.22. Description: Indicates a multi-bin mailbox error. Action: 1 Verify that the c-link and power cables are connected. = Error code from the optional device 2 Turn the printer off and on to reset the printer. 3 Replace the C-link cables. 4 Replace the multi-bin mailbox controller board PCA. 67. ERROR POWER CYCLE Event log message: 67.00.0 Description: Indicates an electronic controller error. Action: 1 Turn the printer off and on to reset the printer. = Description:
1 = Controller board error 2 = Controller board IC malfunction 3 = Internal communication malfunction 2 Replace the controller board. 386 Chapter 7 - Troubleshooting EN