Installation instructions E LECTRICAL CONNECTION If a permanent connection is required Before connecting the appliance to the power supply, always follow the instructions and warnings in the chapter entitled ”Safety instructions”! A disconnector must be provided on the installation side. Switches with a contact opening of more than 3 mm and all-pole disconnection are regarded as disconnectors. This includes LS switches, fuses and contactors. The extractor hood may only be connected by a qualified electrician who is familiar with the regulations of the relevant electricity supply company.
RISK OF INJURY If the power cord of the extractor hood is damaged, it must be replaced by the manufacturer, his customer service or a similarly qualified person to prevent hazardous situations. Electrical specifications The required connection data can be found on the rating plate inside the appliance when the grease filters have been removed. Length of the power cord: approx. 1.30 m. This extractor hood complies with the EC interference suppression regulations. The extractor hood may be connected to a correctly installed earthed socket only. The earthed socket must be attached in the indicated area. – The earthed socket should be connected via its own circuit.
– If the earthed socket is no longer accessible following installation of the extractor hood, a disconnector must be fitted as for a permanent connection. 15 405 73 105 329 105 105 329 105