Chapter 5: Advanced Serverboard Setup 5-5 I/O Ports The I/O ports are color coded in conformance with the PC 99 specifi cation. See Figure 5-3 below for the colors and locations of the various I/O ports. Figure 5-3. Rear Panel I/O Ports Mouse (Green) USB 0/1 Ports Keyboard VGA Port (Blue) COM1 Port JLAN1 / JLAN2 (Purple) (Turquoise) 5-6 Installing Memory CAUTION Exercise extreme care when installing or removing memory modules to prevent any possible damage. 1. Insert each memory module vertically into its slot, paying attention to the notch along the bottom of the module to prevent inserting the module incorrectly (see Figure 5-4). See support information below. Note:
each processor has its own built-in memory controller, so CPU2 DIMMs can- not be addressed if only a single CPU is installed. 128 MB, 256 MB, 512 MB, 1 2. Gently press down on the memory module until it snaps into place. GB and 2 GB* memory modules are supported. *With Opteron 246 C-stepping CPUs and above. 5-7