A+ Server 4020A-8R User's Manual Wake-On-LAN The Wake-On-LAN header is desig- nated JWOL. See the table on the right for pin defi nitions. You must have a LAN card with a Wake-On-LAN connector and cable to use the Wake- On-LAN feature. Wake-On-Ring The Wake-On-Ring header is desig- nated JWOR. This function allows your computer to receive and "wake- up" by an incoming call to the modem when in suspend state. See the table on the right for pin defi nitions. You must have a Wake-On-Ring card and cable to use this feature. SMB Power (I 2 C) Header The header at J24 is for I 2 C, which may be used to monitor the status of the power supply, fans and system temperature.
See the table on the right for pin defi nitions. SMB Header The System Management Bus header is located at J22. Connect the appro- priate cable here to utilize SMB on your system. See the table on the right for pin defi nitions. 5-18 Wake-On-LAN Pin Defi nitions (JWOL) Pin# Defi nition 1 +5V Standby 2 Ground 3 Wake-up Wake-On-Ring Pin Defi nitions (JWOR) Pin# Defi nition 1 Ground (Black) 2 Wake-up SMB Power (I2C) Pin Defi nitions (J24) Pin# Defi nition 1 Clock 2 Data 3 N/A 4 N/A 5 N/A SMB Pin Defi nitions (J22) Pin# Defi nition 1 SMB Data 2 Ground 3 SMB Clock 4 N/A