Supermicro A+ Server 4022G-6F — Supermicro A+ Server 4022G-6F User's Manual PDF Download

A + Se r ver 4022G-6F User's Manual 1-2 Serverboard Features At the heart of the A+ SERVER 4022G-6F lies the H8DG6-F, a dual processor serverboard based on the AMD™ Dual SR5690 and one SP5100 chipset. Below are the main features of the H8DG6-F. (See Figure 1-1 for a block diagram of the chipset). Processors The H8DG6-F supports single or dual AMD Opteron 6000 Series processors in AMD Socket G34 type sockets. Please refer to our web site for a complete listing of supported processors (www.supermicro.com).

Memory The H8DGU-F has sixteen single/dual/tri/quad channel 240-pin DIMM sockets that can support up to 128 GB of ECC/Non-ECC UDIMM or up to 512 GB of ECC RDIMM of DDR3-1600/1333/1066 Mhz memory. . SAS An LSI 2008 SAS controller is integrated into the serverboard to support eight SAS2 ports, which are RAID 0, 1 and 10 capable. The SAS drives are hot-swappable units. SAS RAID 5 is also supported with the AOC RAID 5 key (optional) installed on the serverboard. Note: The operating system you use must have RAID support to enable the hot- swap capability and RAID function of the SAS drives.

Serial ATA An on-chip (SP5100) SATA controller is integrated into the H8DG6-F to provide a six-port, 3 Gb/sec SATA subsystem, which is RAID 0, 1, and 10 supported. The SATA drives are hot-swappable units. Note: You must have RAID set up to enable the hot-swap capability of the SATA drives. Documentation on RAID setup guidelines can be found on our web site. PCI Expansion Slots The H8DG6-F has three PCI Express 2.0 x16 slots, one PCI Express 2.0 x8 slot and two PCI Express 2.0 x4 slots. 1-2